effects of valves on cavitation in a centrifugal pump system|when does pump cavitation occur

With over 15 years of offshore and onshore rig installations, Derrick’s Flo-Line Cleaner ™ 500 Series shakers embody an industry-proven balance of product dependability and .

Cavitation is a common issue that can occur even when using high-quality pumping equipment. It happens when the fluid being pumped turns into a vapor at low pressure, leading to the formation of air bubbles. Cavitation typically occurs when the pressure and temperature of the liquid at the impeller suction point are equal to the vapor pressure. In this article, we will explore the effects of valves on cavitation in a centrifugal pump system and discuss various aspects related to this phenomenon.

Cavitation can occur even when using high-quality pumping equipmentand occurs when the fluid being pumped turns to a vapor at low pressure, which causes air bubbles to form. Cavitation occurs when the pressure and temperature of the liquid at the impeller suction point are equal to the vapor pressure. Vapor

Why is Cavitation Bad?

Cavitation can have detrimental effects on the performance and longevity of a centrifugal pump system. Some of the reasons why cavitation is considered bad include:

1. **Damage to Pump Components**: Cavitation can cause erosion and pitting on the impeller, casing, and other pump components. This can lead to reduced efficiency, increased maintenance costs, and ultimately, pump failure.

2. **Noise and Vibration**: Cavitation often produces loud noise and vibration, which can be disruptive and indicate potential issues within the pump system.

3. **Reduced Pump Efficiency**: The formation of vapor bubbles during cavitation reduces the effective flow rate of the pump, leading to decreased efficiency and performance.

4. **Increased Energy Consumption**: Cavitation can result in increased energy consumption as the pump works harder to overcome the effects of vapor bubbles in the system.

Pump Impeller Cavitation Damage Pictures


The image above illustrates the damage that cavitation can cause to a pump impeller. The erosion and pitting on the impeller blades are clear indicators of cavitation-related issues.

What Causes Centrifugal Pump Cavitation?

Several factors can contribute to the occurrence of cavitation in a centrifugal pump system. Some common causes include:

1. **High Pump Speed**: Operating the pump at high speeds can create low-pressure zones within the system, leading to cavitation.

2. **Incorrect Pump Sizing**: Using a pump that is either too large or too small for the intended application can increase the likelihood of cavitation.

3. **Restricted Flow**: Any obstructions or restrictions in the flow path of the pump can cause cavitation by disrupting the smooth flow of liquid.

4. **Low NPSH**: Net Positive Suction Head (NPSH) is a critical parameter that influences cavitation. Insufficient NPSH can result in cavitation occurring at the impeller inlet.

How to Avoid Cavitation in Pumps

To prevent cavitation and its negative effects in a centrifugal pump system, the following measures can be taken:

1. **Proper Pump Selection**: Choose a pump that is correctly sized and suited for the specific application to avoid issues related to cavitation.

2. **Maintain Adequate NPSH**: Ensure that the NPSH available is greater than the NPSH required by the pump to prevent cavitation.

3. **Regular Maintenance**: Conduct routine inspections and maintenance of the pump system to identify and address any potential cavitation issues early on.

4. **Optimize System Design**: Design the pump system with proper piping, valves, and fittings to minimize flow restrictions and pressure drops.

How to Solve Pump Cavitation

If cavitation is already occurring in a centrifugal pump system, several steps can be taken to address the issue:

1. **Increase NPSH**: If possible, increase the NPSH available to the pump by adjusting system parameters or modifying the pump installation.

2. **Reduce Pump Speed**: Lowering the pump speed can help reduce the formation of vapor bubbles and alleviate cavitation.

3. **Repair or Replace Damaged Components**: Address any erosion or pitting on pump components by repairing or replacing them to restore optimal pump performance.

4. **Consult a Professional**: In complex cases of cavitation, it is advisable to seek the expertise of a pump specialist or engineer to diagnose and resolve the issue effectively.

When Does Pump Cavitation Occur?

Pump cavitation can occur under various conditions, including:

1. **High Flow Rates**: Operating the pump at high flow rates can lead to low-pressure zones and cavitation.

2. **Suction Lift**: When the pump is required to lift the fluid vertically, the risk of cavitation increases due to the additional suction head required.

3. **Temperature Variations**: Significant changes in temperature can affect the vapor pressure of the fluid, potentially causing cavitation.

What Does Pump Cavitation Mean?

Pump cavitation refers to the formation and collapse of vapor bubbles within a pump system due to low pressure conditions. These vapor bubbles can cause damage to pump components and hinder the efficient operation of the pump.

What Causes Centrifugal Pump to Vent?

Net Positive Suction Head Available (NPSHa) is a calculation made from the suction side of the pump configuration and is basically the difference between the pressure on the

Decanter centrifuge is widely used in oil field to treat drilling mud, drilling cuttings, and oil sludge and waste water generated from the drilling activities. GN Solids Control makes various sizes of 2-phase decanter centrifuge, 3-phase decanter centrifuge, vertical centrifuge (normally called as vertical cuttings dryer), and disc centrifuge.Take a look at Aaron Equipment’s large inventory of unused and used decanter centrifuges. Request a quote for a decanter centrifuge online today.

effects of valves on cavitation in a centrifugal pump system|when does pump cavitation occur