centrifugal pump incompressible|centrifugal pump operation : consultant To create the mesh, we recommend using the Standardalgorithm, which is a good choice in general as it is quite automated and delivers good results for most geometries. In this … See more This is failure of either the drive console or pump head to drive the centrifugal pump and create forward circuit blood flow. ECMO support will stop. Effects. VA ECMO: if the circulation is largely supported by ECMO flow, this will be associated with haemodynamic collapse and retrograde circuit flow. If reasonable native cardiac function exists .
{plog:ftitle_list}
The Thoratec CentriMag (Abbott Laboratories, formerly Thoratec Corporation, Pleasanton, CA, USA) is a third-generation, electrically operated, extracorporeal, centrifugal blood pump (Fig. 6.19).Capable of providing short-term support to the left or right ventricles, it can also be used in combination with an oxygenator for ECMO [72].Frequently used as a “bridge-to-decision” .
Centrifugal pumps play a crucial role in various industries, including oil and gas, water treatment, and manufacturing. Understanding the performance, operation, and simulation of centrifugal pumps is essential for optimizing their efficiency and reliability. In this tutorial, we will focus on setting up and running an incompressible simulation of a centrifugal pump using SimScale. We will cover key steps such as creating a rotating zone, assigning boundary conditions, materials, and properties, as well as meshing the model for accurate results.
This tutorial teaches how to: 1. Set up and run an incompressible simulation, making use of a rotating zone 2. Assign saved selections in SimScale 3. Assign boundary conditions, material, and other properties to the simulation 4. Mesh with the SimScale standard meshing algorithm We are following the typical
Setting Up an Incompressible Simulation
To begin with, it is important to understand the basics of incompressible flow and how it applies to centrifugal pump simulations. Incompressible flow assumes that the fluid density remains constant throughout the simulation, which is a valid assumption for many liquid flows. In the context of a centrifugal pump, the incompressible flow model simplifies the analysis while providing accurate results.
When setting up an incompressible simulation in SimScale for a centrifugal pump, one of the key steps is to define a rotating zone. The rotating zone represents the impeller of the pump and allows for the simulation of the pump's rotational motion. By accurately defining the rotating zone, we can capture the fluid dynamics within the pump and analyze its performance under various operating conditions.
Assigning Saved Selections in SimScale
SimScale offers the ability to create and save selections, which can be used to assign boundary conditions, materials, and other properties to the simulation. Saved selections streamline the setup process and ensure consistency across different parts of the model. When simulating a centrifugal pump, it is important to assign appropriate boundary conditions at the inlet, outlet, and other critical regions to accurately capture the flow behavior.
By utilizing saved selections in SimScale, users can easily apply predefined settings to different parts of the model, saving time and reducing the risk of errors. This feature is particularly useful when working with complex geometries, such as the casing and impeller of a centrifugal pump, where different boundary conditions may be required.
Assigning Boundary Conditions, Material, and Other Properties
In a centrifugal pump simulation, assigning boundary conditions, material properties, and other settings correctly is crucial for obtaining meaningful results. The inlet boundary condition defines the flow rate and velocity profile entering the pump, while the outlet boundary condition specifies the pressure or flow resistance at the pump's discharge. By accurately defining these boundary conditions, users can analyze the pump's performance in terms of pressure, flow rate, and efficiency.
Additionally, assigning the correct material properties to the fluid being pumped is essential for accurate simulation results. The viscosity, density, and other fluid properties influence the flow behavior within the pump and impact its overall performance. By specifying the material properties accurately, users can simulate different operating conditions and assess the pump's performance under varying fluid conditions.
Meshing with the SimScale Standard Meshing Algorithm
Meshing is a critical step in the simulation process, as it discretizes the geometry into smaller elements to capture the flow behavior accurately. SimScale offers a standard meshing algorithm that automatically generates a high-quality mesh based on the geometry and user-defined settings. When meshing a centrifugal pump model, it is important to ensure that the mesh resolution is sufficient to capture the complex flow patterns within the pump.
By using the SimScale standard meshing algorithm, users can create a mesh that is optimized for centrifugal pump simulations, balancing computational efficiency with accuracy. The mesh quality plays a significant role in the simulation results, as it affects the convergence of the solution and the overall reliability of the analysis.
To begin, click the button below. It will copy the tutorial project containing the geometry into your Workbench. The following picture demonstrates the original geometry that should be visible after importing the tutorial project. See more
Pressure and Head. If the discharge of a centrifugal pump is pointed straight up into the air the fluid will pumped to a certain height - or head - called the shut off head. This maximum head is .
centrifugal pump incompressible|centrifugal pump operation