basic maintenance of centrifugal pump|centrifugal pump troubleshooting chart : solution All bearings will eventually fail, but in most cases, failure is caused by the lubricant or lack thereof, not equipment fatigue. Refer to your operations manual for lubricating instructions. See more Ecoserv developed and is successfully delivering the industry’s first specialized remotely operated application for mud pit cleaning on offshore drilling assets and frac tank cleaning .
{plog:ftitle_list}
Oily sludge (OS) contains a large number of hazardous materials, and froth flotation can achieve oil recovery and non-hazardous disposal of OS simultaneously. The influence of flotation parameters on OS treatment and the flotation mechanism were studied. OS samples were taken from Shengli Oilfield in May 2017 (OSS) and May 2020 (OST), respectively. .
Before we dive into our recommended centrifugal pump maintenance schedule, let's make sure you have a good grasp of how the pump itself works. In its simplest form, a centrifugal pump is made from a housing with an inlet and outlet. There is an impeller that is located inside the housing, and a motor or drive that powers the impeller to create the pumping action.
Before we dive into our recommended centrifugal pump maintenance schedule, let make sure you a good grasp of how the pump itself works. In its simplest form, a centrifugal pump is made from a housing with an inlet and outlet. There is an impeller that is located inside the housing, and a motor or drive
Centrifugal Pump Troubleshooting Chart
When it comes to troubleshooting issues with your centrifugal pump, having a chart can be a handy tool. Here are some common problems and solutions you may encounter:
1. **Low Flow Rate**: Check for clogs in the pump inlet or outlet, and ensure the impeller is not damaged.
2. **High Power Consumption**: This could indicate a problem with the motor or impeller, check for proper alignment and balance.
3. **Vibration and Noise**: Misalignment of the pump or motor could be causing excessive vibration, check and adjust as needed.
4. **Leakage**: Inspect seals and gaskets for wear and tear, replace if necessary.
5. **Overheating**: Check for blockages in the pump or impeller, and ensure proper lubrication of bearings.
Centrifugal Pump Maintenance Checklist
Regular maintenance is key to ensuring the longevity and efficiency of your centrifugal pump. Here is a basic maintenance checklist to follow:
1. **Inspect and Clean**: Regularly inspect the pump for any signs of damage or wear, and clean any debris or buildup in the pump housing.
2. **Check Alignment**: Ensure the pump and motor are properly aligned to prevent excessive wear and vibration.
3. **Lubricate Bearings**: Keep bearings properly lubricated to reduce friction and extend their lifespan.
4. **Monitor Temperature and Pressure**: Regularly check the temperature and pressure readings to ensure the pump is operating within safe limits.
5. **Replace Seals and Gaskets**: Inspect and replace seals and gaskets as needed to prevent leakage and maintain efficiency.
Centrifugal Pump Maintenance Procedure
Following a structured maintenance procedure can help you keep your centrifugal pump in optimal condition. Here is a general maintenance procedure to follow:
1. **Shut Down the Pump**: Before starting any maintenance, make sure to shut down the pump and disconnect power.
2. **Inspect and Clean**: Remove the pump casing and inspect the impeller, casing, and bearings for any signs of damage or wear. Clean any debris or buildup.
3. **Check Alignment**: Use a dial indicator to check the alignment of the pump and motor shafts, and adjust as needed.
4. **Lubricate Bearings**: Add grease or oil to the bearings as recommended by the manufacturer.
5. **Check Seals and Gaskets**: Inspect seals and gaskets for any leaks or damage, and replace if necessary.
Now that we have an understanding of how centrifugal pumps operate, we can give an overview of its most common parts: 1. Casing (Volute) – As we learned earlier, this acts as a pressure containment vessel. It directs the flow of liquid in and out of
a sellable product. The ATDU process has been used extensively for oil separation and recovery throughout the world including countries in the Middle East, Southeast Asia, North America, and the Caribbean. ATDU TECHNOLOGY APPLICATION ATDU process has been in use for over a decade while processing oily sludge
basic maintenance of centrifugal pump|centrifugal pump troubleshooting chart